Laser cutting machine safety operation regulations

1.Start the laser in strict accordance with the laser starting procedure, dimming, and test the machine.

2. Wear labor protection equipment according to regulations, and wear protective glasses that meet the regulations near the laser beam.

3.before it is clear whether a material can be irradiated or cut by laser, do not process it, so as not to produce smoke and vapor, causing danger.

4. When the equipment is started, the operator shall not leave the post or entrust people to be managed, and if it is really necessary to leave, it should stop or cut off the power switch.

5. Turn off the laser or shutter when not processing; Do not place paper, cloth, or other flammable materials near unprotected laser beams.


6. When an abnormality is found during processing, it should be stopped immediately, and the fault should be eliminated or reported to the supervisor in time.

7. When using gas cylinders, it is forbidden for gas cylinders to burst in the sun or be close to heat sources. When opening the bottle valve, the operator must stand on the side of the nozzle.

8. Comply with high-pressure safety regulations during maintenance.

9. After starting, the machine tool should be manually started in the direction of the low-speed X, Y and Z axes to check and confirm whether there is any abnormality. After the new workpiece program is entered, it should be tested and checked in operation.

10. When feeding, be sure to look at the feeding state, so as to avoid the sheet metal arching and hitting the laser head, the consequences are serious.

x -

Online chat

service hotline:
+86 551 66370766



If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!